H1 Oil tank rubbers

Any triple related issues, topics or stories then POST THEM HERE.......

H1 Oil tank rubbers

Postby Phil M » Sun Feb 10, 2019 12:54 pm

Hi guys, so it seems the two rubbers 92075-166 and 92075-183 are hard or even impossible to get, I have found the round one on ebay in the US, but by the time I pay the customs charges etc its crazy money, so my question is, has anybody found a suitable the part to us? I saw some comments about using a side panel rubber for the oval one but nothing conclusive. What about the tank securing band, anything else fit that too??

Thanks,Phil
Too many bikes, not enough time!
Phil M
 
Posts: 29
Joined: Fri Aug 17, 2018 9:11 pm
Location: Hampshire

Re: H1 Oil tank rubbers

Postby petearis » Sun Feb 10, 2019 4:51 pm

Z-Power do the rubber rear fuel tank band, maybe Simon Lister (KawasakiTripleParts) also.

Pete
User avatar
petearis
Expert
 
Posts: 398
Joined: Thu Dec 21, 2006 6:32 pm
Location: North West England

Re: H1 Oil tank rubbers

Postby Phil M » Sun Feb 10, 2019 6:03 pm

Sorry, I didnt make myself clear there, I meant the oil tank band.

Thanks.
Too many bikes, not enough time!
Phil M
 
Posts: 29
Joined: Fri Aug 17, 2018 9:11 pm
Location: Hampshire

Re: H1 Oil tank rubbers

Postby Phil M » Wed Feb 13, 2019 2:32 pm

bump
Too many bikes, not enough time!
Phil M
 
Posts: 29
Joined: Fri Aug 17, 2018 9:11 pm
Location: Hampshire

Re: H1 Oil tank rubbers

Postby Phil M » Fri Feb 22, 2019 7:49 pm

So I assume you all managed to get these parts, and I thought they were like rocking horse poo! it'll just be my bike without them then.....
Too many bikes, not enough time!
Phil M
 
Posts: 29
Joined: Fri Aug 17, 2018 9:11 pm
Location: Hampshire

Re: H1 Oil tank rubbers

Postby malc87 » Fri Feb 22, 2019 8:38 pm

Not sure what you are after?
User avatar
malc87
Expert
 
Posts: 9862
Joined: Wed May 03, 2006 7:05 pm
Location: Lancs

Re: H1 Oil tank rubbers

Postby Phil M » Sat Feb 23, 2019 4:35 pm

malc87 wrote:Not sure what you are after?


Really!! is my post that difficult to understand, I guess that explains why nobody replied.

I'd hoped joining this forum would help me building my bike, surely that's why we go on forums like this, to help or be helped. Asking about the options for what appear to be rare parts would to me come under the "help" category. All I asked is if any other parts would do the same job.

I pm'd a member 2 weeks ago asking about something that had been mentioned on this forum, no reply to that either. not seeming much of a helpful site :( I'm wondering why we are paying to access the forum......
Too many bikes, not enough time!
Phil M
 
Posts: 29
Joined: Fri Aug 17, 2018 9:11 pm
Location: Hampshire

Re: H1 Oil tank rubbers

Postby malc87 » Sat Feb 23, 2019 7:15 pm

Showing a photo of the page out the parts book would help, Thumbs Up
I looked for the first rubbers you mentioned at first and found them at Mach 4 on ebay and like you said they were expensive.
I only really do H2"s so im not familiar with the 500"s especially the later ones.
With a picture I will have a better idea what you are after and will try to help :D
User avatar
malc87
Expert
 
Posts: 9862
Joined: Wed May 03, 2006 7:05 pm
Location: Lancs

Re: H1 Oil tank rubbers

Postby Kawaclive » Sat Feb 23, 2019 11:04 pm

Hi, you could try to contact eBay seller uks1 as he has had lots of small triple parts in the past.
Those grommets are a funny shape/ size. I think you can make the long one up from a similar profile one, cut it to size and glue it back together.
I can see you are frustrated by the apparent lack of help but the post could have been more detailed.
For example not all H1’s have the same oil tank or fittings so the exact model would have helped. I appreciate that a a new or first time triple owner you may not have the experience to know that they are different.
Basically, the more detail the better.
Also, a lot of triple owners may only know about the size and model they own so only a percentage of forum owners would be in a position to answer.
Keep the faith, this is normally a great friendly and helpful club.
Kawaclive
Expert
 
Posts: 481
Joined: Mon Oct 01, 2007 10:26 pm
Location: Surrey

Re: H1 Oil tank rubbers

Postby Tony_d123 » Sun Feb 24, 2019 9:03 am

OK Phil, you can put your dummy back in the pram :lol: As others have mentioned a specific model type or pics would have helped your cause.
The best thing you can do is put those part numbers in an eBay search and set an email reminder so you get notified as soon as one appears on eBay.
Putting them into Google sometimes yields results, but beware the generic Parts sites that list them but don't actually have them in stock.
You may have to get creative as a short term fix e,g, squashing a suitably sized round grommet would work for 92075-166

The benefits of being a member include:-

* Discounts available with many suppliers
* Four 60 page magazines a year
* Regular rallies and events, with many trophies available to win for club members
* Preferential rates for club members from insurance companies
* Full access to the "Members Only" sections of the Forum and the Facebook Group

Not just access to the "Members Only" sections of the Forum and the Facebook Group Thumbs Up
User avatar
Tony_d123
Expert
 
Posts: 1852
Joined: Fri May 12, 2006 10:00 am
Location: Blackpool

Re: H1 Oil tank rubbers

Postby David Riley » Sun Feb 24, 2019 9:12 am

Phil.

Had a google and the only one's i can find are these -
https://www.ebay.co.uk/itm/KAWASAKI-NOS ... rk:29:pf:0
https://www.ebay.co.uk/itm/NOS-Kawasaki ... 0005.m1851
Stupid money though!
You might be better looking on ebay for something of a similar length and make do with that. Mine is 23cm from one end of buckle to the other end of the buckle at the other end(Total Length).
Dave.
H1F, H1A Flat Tracker, Yam XSR700 & a Yam SZR660 project.
David Riley
Expert
 
Posts: 325
Joined: Wed Oct 25, 2006 12:33 pm
Location: Earby, Lancashire

Re: H1 Oil tank rubbers

Postby Collyolly » Sun Feb 24, 2019 10:08 am

Hi Phil
I am new to this site as well and I can only complement the information I have been able to glean and the advice I have received.
Most owners probably just enjoy the ownership aspect and are not really into the technical details of which grommet goes where.
Last edited by Collyolly on Sun Feb 24, 2019 5:03 pm, edited 1 time in total.
Collyolly
Expert
 
Posts: 116
Joined: Fri Aug 17, 2018 7:52 pm
Location: Kent

Re: H1 Oil tank rubbers

Postby Tony_d123 » Sun Feb 24, 2019 10:28 am

So it's 32100-017 you're looking for? Try looking for universal straps with similar dimensions.

https://www.ebay.co.uk/itm/RUBBER-BATTE ... Sw9GhYYmaR
User avatar
Tony_d123
Expert
 
Posts: 1852
Joined: Fri May 12, 2006 10:00 am
Location: Blackpool

Re: H1 Oil tank rubbers

Postby Phil M » Sun Feb 24, 2019 10:31 am

Thank you guys, that gives me something to work to, the length of the band is very helpful.

Once again, thank you. Thumbs Up
Too many bikes, not enough time!
Phil M
 
Posts: 29
Joined: Fri Aug 17, 2018 9:11 pm
Location: Hampshire

Re: H1 Oil tank rubbers

Postby g6mow » Sun Feb 24, 2019 5:22 pm

I have found a piece of inner tube works well Thumbs Up :D
User avatar
g6mow
Expert
 
Posts: 2916
Joined: Wed May 03, 2006 7:05 pm
Location: Chorley Lancashire

Re: H1 Oil tank rubbers

Postby David Riley » Sun Feb 24, 2019 8:40 pm

g6mow wrote:I have found a piece of inner tube works well Thumbs Up :D

I was going to suggest that too! :)
H1F, H1A Flat Tracker, Yam XSR700 & a Yam SZR660 project.
David Riley
Expert
 
Posts: 325
Joined: Wed Oct 25, 2006 12:33 pm
Location: Earby, Lancashire

Re: H1 Oil tank rubbers

Postby Phil M » Mon Feb 25, 2019 6:59 pm

g6mow wrote:I have found a piece of inner tube works well Thumbs Up :D


I wondered about that, that will work until I can match it to something else.

Thanks.
Too many bikes, not enough time!
Phil M
 
Posts: 29
Joined: Fri Aug 17, 2018 9:11 pm
Location: Hampshire

Re: H1 Oil tank rubbers

Postby TripleS3a » Mon Feb 25, 2019 8:37 pm

What...You don't fancy paying £160.00 plus import duty for one then :shock:
User avatar
TripleS3a
Newbie
 
Posts: 32
Joined: Mon Aug 31, 2015 1:12 pm
Location: West Sussex

Re: H1 Oil tank rubbers

Postby Phil M » Fri Mar 01, 2019 8:54 pm

I got a universal band off eBay, made to measure... its perfect for a fiver. :D

Will watch out for the two rubbers which go under the tank next.
Too many bikes, not enough time!
Phil M
 
Posts: 29
Joined: Fri Aug 17, 2018 9:11 pm
Location: Hampshire

Re: H1 Oil tank rubbers

Postby g6mow » Fri Mar 01, 2019 11:17 pm

User avatar
g6mow
Expert
 
Posts: 2916
Joined: Wed May 03, 2006 7:05 pm
Location: Chorley Lancashire


Return to All Things 'Triple' Related.

Who is online

Users browsing this forum: No registered users and 3 guests