Accent ignition for H1B

Any triple related issues, topics or stories then POST THEM HERE.......

Accent ignition for H1B

Postby Ogri211 » Thu Jul 05, 2018 7:29 am

I have been speaking to Uwe from Accent regarding the ignition plate for the H1, as you can see from my previous posting about it it would appear that the unit he is developing only fitsthe later models with the 2 piece cover, he has asked me what the differences are and if I can get him a backplate. My questions are for all you multi bike and crank men , firstly is the end of the crank the same on the H1B and the later models, and are the casings interchangeable from the Bt the later models or would you have to fit the alternator parts from the later model as well.

I am also looking to see if someone has a spare backplate a Mitsubushi AZ2010M that they could sell me so I can send it to Uwe, he asked me for one but mine is in use, I feel that if he modifies his unit to fit the earlier models as well this will benefit many owners as well , as I have one of his units on my GT750 and it runs faultlessly and only took 30 to fit and set up.
User avatar
Ogri211
Expert
 
Posts: 153
Joined: Thu Jul 09, 2015 6:48 pm
Location: Glasgow

Re: Accent ignition for H1B

Postby Ogri211 » Wed Jul 11, 2018 8:15 am

As no one seems to have a spare plate I would be grateful for any suggestions where to try and get one is there any other bikes that use the same plate I know the H1R uses it but I'm sure they won't be many of them lying about.
User avatar
Ogri211
Expert
 
Posts: 153
Joined: Thu Jul 09, 2015 6:48 pm
Location: Glasgow

Re: Accent ignition for H1B

Postby Barrie » Wed Jul 11, 2018 4:04 pm

The H1 b plate is a contact breaker plate peculiar to that model.
Barrie
Expert
 
Posts: 657
Joined: Thu May 04, 2006 11:52 am
Location: Sittingbourne Kent U.K.

Re: Accent ignition for H1B

Postby Ogri211 » Thu Jul 12, 2018 6:13 am

That's why it will be so hard to get one I may need to send him mine when I take the bike off the road in the winter.
User avatar
Ogri211
Expert
 
Posts: 153
Joined: Thu Jul 09, 2015 6:48 pm
Location: Glasgow

Re: Accent ignition for H1B

Postby Doctorpayday » Thu Jul 12, 2018 7:55 am

Hi
I have a knackered stator for late H1/KH500, if that helps.

Doc
No Poke without Smoke.
User avatar
Doctorpayday
Expert
 
Posts: 552
Joined: Tue Jun 16, 2009 9:43 pm
Location: Ascot

Re: Accent ignition for H1B

Postby robh1f » Fri Jul 13, 2018 10:02 pm

Think I have a NOS h1b backplate assembly that you could BORROW if that suits ??
robh1f
Expert
 
Posts: 1567
Joined: Wed May 03, 2006 7:05 pm
Location: Essex Coast

Re: Accent ignition for H1B

Postby Ogri211 » Sat Jul 14, 2018 6:50 pm

robh1f wrote:Think I have a NOS h1b backplate assembly that you could BORROW if that suits ??


Hello its to send to Uwe in Germany to develop an electronic unit so I will ask him how long he would require it for as it wouldnt be get used in the system , I am also going to offer to test his system for him on my bike, I will send him an email and let you know what he says , thanks for the offer.
User avatar
Ogri211
Expert
 
Posts: 153
Joined: Thu Jul 09, 2015 6:48 pm
Location: Glasgow

Re: Accent ignition for H1B

Postby robh1f » Sun Jul 15, 2018 10:23 am

OK I will dig it out to make sure its the correct part number Thumbs Up
robh1f
Expert
 
Posts: 1567
Joined: Wed May 03, 2006 7:05 pm
Location: Essex Coast

Re: Accent ignition for H1B

Postby Ogri211 » Mon Jul 16, 2018 12:03 pm

Thanks I have contacted Uwe in Germany and also I am going offshore this week so I will get back to you when I hear from him.

Cheers.
User avatar
Ogri211
Expert
 
Posts: 153
Joined: Thu Jul 09, 2015 6:48 pm
Location: Glasgow

Re: Accent ignition for H1B

Postby scouse » Wed Jul 18, 2018 8:44 pm

Just seen this post, have several S/ H H1 points plates, I'm pretty sure that the earlier H1 European points plates are the same

If you need one still let me know

Gary T
Boffin in a coffin
User avatar
scouse
Expert
 
Posts: 3373
Joined: Wed May 03, 2006 7:05 pm
Location: Knottingley

Re: Accent ignition for H1B

Postby Ogri211 » Fri Jul 20, 2018 7:51 am

Hello yes I am looking for one The one that is on my bike is stamped AZ2010M if you have a spare one that you could sell me that would be great another member offered to lend me one but I would prefer to give one to Uwe for his development, I have emailed him again but I think he is on holiday , I would think that he could use the electronics from his later H1 plate and just make a new resin one to suit the earlier one , as his pick up, which replaces the points cam should be the same.
User avatar
Ogri211
Expert
 
Posts: 153
Joined: Thu Jul 09, 2015 6:48 pm
Location: Glasgow

Re: Accent ignition for H1B

Postby scouse » Fri Jul 20, 2018 3:10 pm

I'll have a look over the weekend Thumbs Up

Gary T
Boffin in a coffin
User avatar
scouse
Expert
 
Posts: 3373
Joined: Wed May 03, 2006 7:05 pm
Location: Knottingley

Re: Accent ignition for H1B

Postby Ogri211 » Fri Jul 20, 2018 7:47 pm

Cheers :D
User avatar
Ogri211
Expert
 
Posts: 153
Joined: Thu Jul 09, 2015 6:48 pm
Location: Glasgow


Return to All Things 'Triple' Related.

Who is online

Users browsing this forum: No registered users and 8 guests